Guhring RF 100 Diver

Product system overview

Guhring RF 100 Diver is a multi-application solid-carbide end-mill family built for ramping, drilling, slotting, roughing, and finishing. Series and item number matter because flute count, diameter, reach, corner treatment, coating, shank, and coolant configuration vary within the family.

Industries and applications

• Ramping, helical entry, plunging, slotting, roughing, and finishing with one family.
• Steel, stainless steel, cast iron, non-ferrous materials, and heat-resistant alloys according to the selected series and cutting data.
• Center-cutting entry work where the selected RF 100 Diver series and item geometry explicitly support drilling or plunging.

Technical and quote details

• Official Series 6798 is a three-flute carbide RF 100 Diver with center cutting, a special drill face, Signum coating, and 41/43/45-degree unequal helix.
• Series 6736 is a four-flute metric carbide family with center cutting, neck clearance, Signum nano-Si coating, right-hand cutting, HB Weldon-flat shank, and 36/37/38-degree unequal helix.
• Series 6736 item records publish diameter, shank and neck diameters, overall length, length of cut, reach, corner treatment, flute count, shank type, and coating.
• Coolant configuration varies by series and item; the Series 6736 record identifies no coolant-through capability while other RF 100 Diver variants promote combined axial and radial internal cooling.
• Guhring publishes series-level documents, item-level sizes, alternatives, and speeds and feeds; the series number and EDP number are required catalog cross-references.
• Published catalog reference: Series 6798 - RF 100 Diver 3 Flute
• Published catalog reference: Series 6736 - RF 100 Diver 4-flute metric, HB shank
• Published catalog reference: EDP 9067360100000 / Series 6736 / Code 10.000 - 10 mm RF 100 Diver
• Published catalog reference: EDP 9067360080000 / Series 6736 / Code 8.000 - 8 mm RF 100 Diver

Selection notes

Store Guhring series, EDP number, and code number separately, then attach the current catalog page and cutting-data document to the operational product record.

Match replacements at item level using diameter, reach, flute count, corner treatment, shank, coating, coolant configuration, material group, and intended operation.

Variables to validate

• RF 100 Diver is not one interchangeable item; verify series, EDP number, diameter, flute count, corner geometry, reach, coating, and shank.
• Application icons do not replace the official speeds-and-feeds record for the exact item and material.
• Do not infer coolant-through capability, helix, flute count, or shank form from the RF 100 Diver family name because those attributes vary across series.

Official product references

• Guhring RF 100 Diver Series 6798
• Guhring RF 100 Diver Series 6736