Home / Knowledge / Okuma MU-5000V

Okuma MU-5000V

Okuma MU-5000V is a five-axis vertical machining center with a trunnion table, double-column construction, 700 x 500 mm published maximum machining volume, 10,000-rpm published spindle, and 32-tool standard magazine. Spindle taper, magazine, APC, turning, automation, and regional options must remain attached to the build.

Company overview

Okuma MU-5000V is a five-axis vertical machining center with a trunnion table, double-column construction, 700 x 500 mm published maximum machining volume, 10,000-rpm published spindle, and 32-tool standard magazine. Spindle taper, magazine, APC, turning, automation, and regional options must remain attached to the build.

Industries and applications

  • Published maximum machining volume is diameter 700 x 500 mm.
  • Published table diameter is 500 mm; collision-free capacity depends on workholding, tool, and rotary position.

Technical and quote details

  • X travel: 25.59 in / 650 mm.
  • Y travel: 29.53 in / 750 mm.
  • Z travel: 31.50 in / 800 mm.
  • B travel: published trunnion range; verify build.
  • C travel: 360-degree rotary table.
  • Spindle interface: No. 40 standard family; No. 50 configurations documented.
  • Spindle speed: 10,000 rpm highlighted specification; other packages documented.
  • Spindle power: 11/7.5 kW highlighted specification.
  • Tool capacity: 32 standard; 48, 64, and matrix options published.
  • Control: Okuma OSP suite.
  • Control: Five-axis kinematics and calibration must match the installed control.
  • Control: Record probing, turning, APC, ATC, coolant, networking, and automation options.
  • Compatibility, lineage, or lifecycle crosswalk: machine-to-spindle to Tooling qualified for the installed No. 40 or No. 50 MU-5000V spindle (conditional). Verify taper, pull stud, spindle package, balance, tool mass and length, magazine, coolant, and five-axis collision envelope. Evidence: https://www.okuma.com/files/documents/MU-V-Series.pdf

Selection notes

Variables to validate

  • Linear travels and maximum volume do not define the collision-free five-axis envelope.
  • No. 40, No. 50, turning, APC, and magazine configurations must not share one undifferentiated asset specification.
  • Verify kinematic calibration, control revision, spindle, taper, magazine, workholding, and automation from the build.

Official product references

Sources checked 2026-07-13. Product ranges, documents, and availability can change.

Signup