Home / Knowledge / DMG MORI DMU 50 (3rd generation)

DMG MORI DMU 50 (3rd generation)

DMG MORI DMU 50 third generation is a five-axis universal machining center with a swivel rotary table. The official model page publishes 650 x 520 x 475 mm travels, a 630 mm maximum workpiece diameter, 600 mm height, 300 kg load, a 15,000-rpm standard speedMASTER spindle with a 20,000-rpm option, and Siemens, Heidenhain, or MAPPS Fanuc control alternatives.

Company overview

DMG MORI DMU 50 third generation is a five-axis universal machining center with a swivel rotary table. The official model page publishes 650 x 520 x 475 mm travels, a 630 mm maximum workpiece diameter, 600 mm height, 300 kg load, a 15,000-rpm standard speedMASTER spindle with a 20,000-rpm option, and Siemens, Heidenhain, or MAPPS Fanuc control alternatives.

Industries and applications

  • Published maximum workpiece diameter is 24.8 in / 630 mm, height is 23.6 in / 600 mm, and weight is 661 lb / 300 kg.
  • Five-axis collision-free capacity depends on part, fixture, tool, spindle, table angle, and automation configuration rather than linear travels alone.

Technical and quote details

  • X travel: 25.6 in / 650 mm.
  • Y travel: 20.5 in / 520 mm.
  • Z travel: 18.7 in / 475 mm.
  • B travel: -35 to +110 degrees published swivel range.
  • C travel: 360 degrees.
  • Spindle interface: speedMASTER interface is configuration and region dependent; confirm taper and pull-stud standard from the build.
  • Spindle speed: 15,000 rpm standard; 20,000 rpm option published.
  • Spindle power: 21 kW / 111 Nm standard 15,000-rpm package; higher-output packages published.
  • Tool capacity: 30 pockets standard; 60, 120, or 180 pockets published as options.
  • Control: Siemens alternative.
  • Control: Heidenhain alternative.
  • Control: MAPPS Fanuc alternative.
  • Control: Record exact control, software generation, cycles, probing, kinematics, networking, and automation options.
  • Compatibility, lineage, or lifecycle crosswalk: machine-to-spindle to Tooling qualified for the installed speedMASTER spindle and magazine (conditional). Verify spindle interface, 15,000- or 20,000-rpm package, balance, tool mass and length, magazine option, coolant, and five-axis collision envelope. Evidence: https://en.dmgmori.com/products/machines/milling/5-axis-milling/dmu/dmu-50

Selection notes

Variables to validate

  • Control and spindle alternatives are not interchangeable metadata; preserve the installed combination and region.
  • Linear travels do not define the collision-free five-axis work envelope.
  • Magazine, automation, spindle, kinematic calibration, probing, and software options must be verified from the build and current backups.

Official product references

Sources checked 2026-07-13. Product ranges, documents, and availability can change.

Signup