Home / Knowledge / Walter Tools DC170 Supreme vs Tungaloy-NTK DrillMeister
Walter Tools DC170 Supreme vs Tungaloy-NTK DrillMeister
Walter Tools DC170 Supreme and Tungaloy-NTK DrillMeister are documented holemaking systems with different product architecture and application priorities. DC170 Supreme is Walter's coolant-through solid-carbide drill family for high-performance drilling, with specified length variants from short through deep-hole ratios. Tungaloy DrillMeister is an exchangeable-head drill system with reusable TID bodies, multiple drill-head geometries, internal coolant, and several straight, modular, chamfering, and compact-machine body configurations.
Side-by-side comparison
| Category | Walter Tools DC170 Supreme | Tungaloy-NTK DrillMeister |
|---|---|---|
| System architecture | Walter's catalog identifies DC170 Supreme as a 140-degree coolant-through solid-carbide drill family. | Official head branches include DMP general purpose, DMC high accuracy, DMF flat-edge, DMH reinforced edge, DMN nonferrous, and DMM stainless/exotic-material geometries. |
| Documented application focus | Production drilling in the ISO P and K material areas identified in Walter literature. | Production drilling where exchangeable heads reduce regrinding, presetting, and tool-inventory requirements. |
| Technical selection detail | Cited 16xD tools use DIN 6535 HA shanks and WJ30EJ cutting-tool material. | Body branches include TID-F, TID-R, TID-R-E, TID-TT, TIDC, TID-M, TID-S, TIDCF, and TID-L-A-M configurations. |
| Primary documented constraint | Depth ratio and diameter are embedded in the designation and cannot be inferred from the family name. | A DrillMeister diameter does not establish head geometry, grade, body, L/D, shank, or coolant compatibility. |
| Manufacturer-guided selection | Store the complete Walter designation, diameter, depth ratio, grade, shank, coolant, holder, and reconditioning status. | Store the head and body as separate products joined by an official compatibility record, then capture diameter, L/D, material, entry condition, coolant, holder, and cutting data. |
Best fit by application
Walter Tools DC170 Supreme
- Production drilling in the ISO P and K material areas identified in Walter literature.
- Store the complete Walter designation, diameter, depth ratio, grade, shank, coolant, holder, and reconditioning status.
Tungaloy-NTK DrillMeister
- Production drilling where exchangeable heads reduce regrinding, presetting, and tool-inventory requirements.
- Store the head and body as separate products joined by an official compatibility record, then capture diameter, L/D, material, entry condition, coolant, holder, and cutting data.
Selection notes
Use DC170 Supreme when its documented application focus and technical configuration match the operation more closely; use DrillMeister when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- DC170 Supreme: Depth ratio and diameter are embedded in the designation and cannot be inferred from the family name.
- DrillMeister: A DrillMeister diameter does not establish head geometry, grade, body, L/D, shank, or coolant compatibility.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
- DC170 Supreme: Walter DC170 Supreme item record 04.763 mm
- DC170 Supreme: Walter 2024 holemaking catalog
- DC170 Supreme: Walter DC170 Supreme brochure
- DrillMeister: Tungaloy DrillMeister and AddMeisterDrill directory
- DrillMeister: Tungaloy DrillMeister current product catalog
- DrillMeister: Tungaloy DrillMeister DMM expansion
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.