Home / Knowledge / Walter Tools DC170 Supreme vs Allied Machine T-A Pro
Walter Tools DC170 Supreme vs Allied Machine T-A Pro
Walter Tools DC170 Supreme and Allied Machine T-A Pro are documented holemaking systems with different product architecture and application priorities. DC170 Supreme is Walter's coolant-through solid-carbide drill family for high-performance drilling, with specified length variants from short through deep-hole ratios. Allied Machine T-A Pro is a replaceable-insert drilling system for production holemaking.
Side-by-side comparison
| Category | Walter Tools DC170 Supreme | Allied Machine T-A Pro |
|---|---|---|
| System architecture | Walter's catalog identifies DC170 Supreme as a 140-degree coolant-through solid-carbide drill family. | Allied positions T-A Pro as a high-penetration replaceable-insert drill family. |
| Documented application focus | Production drilling in the ISO P and K material areas identified in Walter literature. | Production drilling where a replaceable carbide insert and reusable holder support repeat diameter and material changes. |
| Technical selection detail | Cited 16xD tools use DIN 6535 HA shanks and WJ30EJ cutting-tool material. | The official geometry directory separates material-specific insert options; holder and insert compatibility must be confirmed by series and diameter. |
| Primary documented constraint | Depth ratio and diameter are embedded in the designation and cannot be inferred from the family name. | Do not substitute T-A, GEN2 T-A, T-A Pro, or GEN3SYS inserts by diameter alone. |
| Manufacturer-guided selection | Store the complete Walter designation, diameter, depth ratio, grade, shank, coolant, holder, and reconditioning status. | Record the complete holder and insert numbers, diameter, drilling depth, work material, machine interface, coolant pressure, entry condition, and required tolerance. |
Best fit by application
Walter Tools DC170 Supreme
- Production drilling in the ISO P and K material areas identified in Walter literature.
- Store the complete Walter designation, diameter, depth ratio, grade, shank, coolant, holder, and reconditioning status.
Allied Machine T-A Pro
- Production drilling where a replaceable carbide insert and reusable holder support repeat diameter and material changes.
- Record the complete holder and insert numbers, diameter, drilling depth, work material, machine interface, coolant pressure, entry condition, and required tolerance.
Selection notes
Use DC170 Supreme when its documented application focus and technical configuration match the operation more closely; use T-A Pro when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- DC170 Supreme: Depth ratio and diameter are embedded in the designation and cannot be inferred from the family name.
- T-A Pro: Do not substitute T-A, GEN2 T-A, T-A Pro, or GEN3SYS inserts by diameter alone.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.