Home / Knowledge / Sandvik Coromant CoroDrill 880 vs OSG A Brand AD-MICRO
Sandvik Coromant CoroDrill 880 vs OSG A Brand AD-MICRO
Sandvik Coromant CoroDrill 880 and OSG A Brand AD-MICRO are documented holemaking systems with different product architecture and application priorities. CoroDrill 880 is Sandvik Coromant's indexable drilling system using drill bodies and separate central and peripheral inserts. OSG A Brand AD-MICRO is a small-diameter carbide-drill family released in 4D and 10D lists.
Side-by-side comparison
| Category | Sandvik Coromant CoroDrill 880 | OSG A Brand AD-MICRO |
|---|---|---|
| System architecture | Official body pages identify compatible central C and peripheral P insert interface codes separately. | List 6004 is the 4D branch and List 6010 is the 10D branch. |
| Documented application focus | Indexable production drilling using separate central and peripheral cutting positions. | Small-diameter holes in steels and alloy steels. |
| Technical selection detail | Bodies span different diameter, usable-length ratio, shank, and Coromant Capto configurations. | OSG specifies cutting-edge honing, point thinning, and Shoulder Edge Guard geometry. |
| Primary documented constraint | Central and peripheral inserts are position-specific and use different interface identifiers. | AD-MICRO and coolant-through ADO-MICRO are distinct families. |
| Manufacturer-guided selection | Record the body ordering code plus every central and peripheral insert code, grade, position, torque, connection, and coolant condition. | Capture list, EDP, diameter, L/D, coating, coolant method, tolerance, material, and cutting-data source. |
Best fit by application
Sandvik Coromant CoroDrill 880
- Indexable production drilling using separate central and peripheral cutting positions.
- Record the body ordering code plus every central and peripheral insert code, grade, position, torque, connection, and coolant condition.
OSG A Brand AD-MICRO
- Small-diameter holes in steels and alloy steels.
- Capture list, EDP, diameter, L/D, coating, coolant method, tolerance, material, and cutting-data source.
Selection notes
Use CoroDrill 880 when its documented application focus and technical configuration match the operation more closely; use A Brand AD-MICRO when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- CoroDrill 880: Central and peripheral inserts are position-specific and use different interface identifiers.
- A Brand AD-MICRO: AD-MICRO and coolant-through ADO-MICRO are distinct families.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
- CoroDrill 880: Sandvik CoroDrill 880 body A880-D0812LX25-03
- CoroDrill 880: Sandvik CoroDrill 880 C4 body A880-D1000C4-03
- CoroDrill 880: Sandvik CoroDrill 880 central insert 1044
- A Brand AD-MICRO: OSG official AD-MICRO release and list numbers
- A Brand AD-MICRO: OSG AD-MICRO-10D EDP 8760100 item record
- A Brand AD-MICRO: OSG AD-MICRO-10D EDP 8760300 item record
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.