Home / Knowledge / Sandvik Coromant CoroDrill 880 vs Guhring RT 100 FB
Sandvik Coromant CoroDrill 880 vs Guhring RT 100 FB
Sandvik Coromant CoroDrill 880 and Guhring RT 100 FB are documented holemaking systems with different product architecture and application priorities. CoroDrill 880 is Sandvik Coromant's indexable drilling system using drill bodies and separate central and peripheral inserts. Guhring RT 100 FB Series 6596 is a two-flute, coolant-through flat-bottom carbide drill.
Side-by-side comparison
| Category | Sandvik Coromant CoroDrill 880 | Guhring RT 100 FB |
|---|---|---|
| System architecture | Official body pages identify compatible central C and peripheral P insert interface codes separately. | Series 6596 is approximately 3xD with a 180-degree point. |
| Documented application focus | Indexable production drilling using separate central and peripheral cutting positions. | Flat-bottom holes and low-burr exits. |
| Technical selection detail | Bodies span different diameter, usable-length ratio, shank, and Coromant Capto configurations. | It uses carbide, nano-FIREX coating, internal coolant, and an HA shank. |
| Primary documented constraint | Central and peripheral inserts are position-specific and use different interface identifiers. | Series 6596 and micro Series 6496 are not interchangeable. |
| Manufacturer-guided selection | Record the body ordering code plus every central and peripheral insert code, grade, position, torque, connection, and coolant condition. | Store series, EDP, code, diameter, L/D, point, shank, coating, coolant, and catalog revision. |
Best fit by application
Sandvik Coromant CoroDrill 880
- Indexable production drilling using separate central and peripheral cutting positions.
- Record the body ordering code plus every central and peripheral insert code, grade, position, torque, connection, and coolant condition.
Guhring RT 100 FB
- Flat-bottom holes and low-burr exits.
- Store series, EDP, code, diameter, L/D, point, shank, coating, coolant, and catalog revision.
Selection notes
Use CoroDrill 880 when its documented application focus and technical configuration match the operation more closely; use RT 100 FB when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- CoroDrill 880: Central and peripheral inserts are position-specific and use different interface identifiers.
- RT 100 FB: Series 6596 and micro Series 6496 are not interchangeable.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
- CoroDrill 880: Sandvik CoroDrill 880 body A880-D0812LX25-03
- CoroDrill 880: Sandvik CoroDrill 880 C4 body A880-D1000C4-03
- CoroDrill 880: Sandvik CoroDrill 880 central insert 1044
- RT 100 FB: Guhring RT 100 FB Series 6596
- RT 100 FB: Guhring RT 100 FB EDP 9065960090000
- RT 100 FB: Guhring RT 100 FB official catalog
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.