Home / Knowledge / Sandvik Coromant CoroDrill 880 vs Allied Machine Revolution Drill
Sandvik Coromant CoroDrill 880 vs Allied Machine Revolution Drill
Sandvik Coromant CoroDrill 880 and Allied Machine Revolution Drill are documented holemaking systems with different product architecture and application priorities. CoroDrill 880 is Sandvik Coromant's indexable drilling system using drill bodies and separate central and peripheral inserts. Revolution Drill is Allied Machine's adjustable large-diameter indexable drilling system for drilling from solid or opening an existing hole.
Side-by-side comparison
| Category | Sandvik Coromant CoroDrill 880 | Allied Machine Revolution Drill |
|---|---|---|
| System architecture | Official body pages identify compatible central C and peripheral P insert interface codes separately. | Can drill from solid without a pilot or open an existing hole. |
| Documented application focus | Indexable production drilling using separate central and peripheral cutting positions. | Large-diameter holes on machines with limited available horsepower. |
| Technical selection detail | Bodies span different diameter, usable-length ratio, shank, and Coromant Capto configurations. | Allied states that the system can ignore core shifts up to 3.175 mm (0.125 in) in applicable opening operations. |
| Primary documented constraint | Central and peripheral inserts are position-specific and use different interface identifiers. | Cartridge setup and diameter adjustment require controlled assembly and measurement procedures. |
| Manufacturer-guided selection | Record the body ordering code plus every central and peripheral insert code, grade, position, torque, connection, and coolant condition. | Use Revolution Drill when large-hole flexibility and low-horsepower capability justify an adjustable multi-insert system. |
Best fit by application
Sandvik Coromant CoroDrill 880
- Indexable production drilling using separate central and peripheral cutting positions.
- Record the body ordering code plus every central and peripheral insert code, grade, position, torque, connection, and coolant condition.
Allied Machine Revolution Drill
- Large-diameter holes on machines with limited available horsepower.
- Use Revolution Drill when large-hole flexibility and low-horsepower capability justify an adjustable multi-insert system.
Selection notes
Use CoroDrill 880 when its documented application focus and technical configuration match the operation more closely; use Revolution Drill when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- CoroDrill 880: Central and peripheral inserts are position-specific and use different interface identifiers.
- Revolution Drill: Cartridge setup and diameter adjustment require controlled assembly and measurement procedures.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
- CoroDrill 880: Sandvik CoroDrill 880 body A880-D0812LX25-03
- CoroDrill 880: Sandvik CoroDrill 880 C4 body A880-D1000C4-03
- CoroDrill 880: Sandvik CoroDrill 880 central insert 1044
- Revolution Drill: Allied Revolution Drill official product page
- Revolution Drill: Allied Revolution and Opening Drill cutting data
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.