Home / Knowledge / Sandvik Coromant CoroDrill 860 vs Allied Machine T-A Pro
Sandvik Coromant CoroDrill 860 vs Allied Machine T-A Pro
Sandvik Coromant CoroDrill 860 and Allied Machine T-A Pro are documented holemaking systems with different product architecture and application priorities. CoroDrill 860 is a Sandvik Coromant solid-carbide drill platform split into application-specific GM, PM, SM, and NM variants. Allied Machine T-A Pro is a replaceable-insert drilling system for production holemaking.
Side-by-side comparison
| Category | Sandvik Coromant CoroDrill 860 | Allied Machine T-A Pro |
|---|---|---|
| System architecture | Official product records use complete ISO/ANSI ordering codes and separate Sandvik material IDs. | Allied positions T-A Pro as a high-penetration replaceable-insert drill family. |
| Documented application focus | CoroDrill 860-GM for broad multi-material drilling where the exact GM item supports the work material. | Production drilling where a replaceable carbide insert and reusable holder support repeat diameter and material changes. |
| Technical selection detail | Cited variants publish H8 or H9 achievable hole tolerance depending on the application-specific family and item. | The official geometry directory separates material-specific insert options; holder and insert compatibility must be confirmed by series and diameter. |
| Primary documented constraint | The 860 family suffix is an application distinction, not optional naming; GM, PM, SM, and NM data should not be blended. | Do not substitute T-A, GEN2 T-A, T-A Pro, or GEN3SYS inserts by diameter alone. |
| Manufacturer-guided selection | Store the complete ordering code and material ID, including application suffix and grade, rather than shortening the record to CoroDrill 860. | Record the complete holder and insert numbers, diameter, drilling depth, work material, machine interface, coolant pressure, entry condition, and required tolerance. |
Best fit by application
Sandvik Coromant CoroDrill 860
- CoroDrill 860-GM for broad multi-material drilling where the exact GM item supports the work material.
- Store the complete ordering code and material ID, including application suffix and grade, rather than shortening the record to CoroDrill 860.
Allied Machine T-A Pro
- Production drilling where a replaceable carbide insert and reusable holder support repeat diameter and material changes.
- Record the complete holder and insert numbers, diameter, drilling depth, work material, machine interface, coolant pressure, entry condition, and required tolerance.
Selection notes
Use CoroDrill 860 when its documented application focus and technical configuration match the operation more closely; use T-A Pro when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- CoroDrill 860: The 860 family suffix is an application distinction, not optional naming; GM, PM, SM, and NM data should not be blended.
- T-A Pro: Do not substitute T-A, GEN2 T-A, T-A Pro, or GEN3SYS inserts by diameter alone.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
- CoroDrill 860: Sandvik CoroDrill 860-GM item 7781510
- CoroDrill 860: Sandvik CoroDrill 860-PM item 8151333
- CoroDrill 860: Sandvik obsolete CoroDrill 860-PM replacement record
- T-A Pro: Allied Machine replaceable insert drill directory
- T-A Pro: Allied Machine T-A Pro insert geometries
- T-A Pro: Allied Machine product literature
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.