Home / Knowledge / OSG A Brand ADO vs Guhring RT 100 FB
OSG A Brand ADO vs Guhring RT 100 FB
OSG A Brand ADO and Guhring RT 100 FB are documented holemaking systems with different product architecture and application priorities. OSG A Brand ADO is a coolant-fed carbide drill platform with distinct depth lists. Guhring RT 100 FB Series 6596 is a two-flute, coolant-through flat-bottom carbide drill.
Side-by-side comparison
| Category | OSG A Brand ADO | Guhring RT 100 FB |
|---|---|---|
| System architecture | List 6500 is ADO 3D, List 6510 is 5D, and List 6520 is 8D. | Series 6596 is approximately 3xD with a 180-degree point. |
| Documented application focus | High-performance drilling in the materials available for the exact ADO item. | Flat-bottom holes and low-burr exits. |
| Technical selection detail | Official item pages publish unique EDP numbers. | It uses carbide, nano-FIREX coating, internal coolant, and an HA shank. |
| Primary documented constraint | Branding and diameter do not establish list, L/D, shank, coating, coolant, pilot, or cutting-data equivalence. | Series 6596 and micro Series 6496 are not interchangeable. |
| Manufacturer-guided selection | Capture list, EDP, description, diameter, L/D, lengths, shank, coating, coolant, material, and cutting-data source. | Store series, EDP, code, diameter, L/D, point, shank, coating, coolant, and catalog revision. |
Best fit by application
OSG A Brand ADO
- High-performance drilling in the materials available for the exact ADO item.
- Capture list, EDP, description, diameter, L/D, lengths, shank, coating, coolant, material, and cutting-data source.
Guhring RT 100 FB
- Flat-bottom holes and low-burr exits.
- Store series, EDP, code, diameter, L/D, point, shank, coating, coolant, and catalog revision.
Selection notes
Use A Brand ADO when its documented application focus and technical configuration match the operation more closely; use RT 100 FB when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- A Brand ADO: Branding and diameter do not establish list, L/D, shank, coating, coolant, pilot, or cutting-data equivalence.
- RT 100 FB: Series 6596 and micro Series 6496 are not interchangeable.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
- A Brand ADO: OSG A Brand ADO Lists 6500, 6510, and 6520 technical data
- A Brand ADO: OSG A Brand ADO-3D EDP 8691100 item record
- A Brand ADO: OSG A Brand ADO-5D EDP 8692460 item record
- A Brand ADO: OSG A Brand ADO-5D EDP 651034211 item record
- RT 100 FB: Guhring RT 100 FB Series 6596
- RT 100 FB: Guhring RT 100 FB EDP 9065960090000
- RT 100 FB: Guhring RT 100 FB official catalog
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.