Home / Knowledge / OSG A Brand ADO vs Allied Machine Revolution Drill
OSG A Brand ADO vs Allied Machine Revolution Drill
OSG A Brand ADO and Allied Machine Revolution Drill are documented holemaking systems with different product architecture and application priorities. OSG A Brand ADO is a coolant-fed carbide drill platform with distinct depth lists. Revolution Drill is Allied Machine's adjustable large-diameter indexable drilling system for drilling from solid or opening an existing hole.
Side-by-side comparison
| Category | OSG A Brand ADO | Allied Machine Revolution Drill |
|---|---|---|
| System architecture | List 6500 is ADO 3D, List 6510 is 5D, and List 6520 is 8D. | Can drill from solid without a pilot or open an existing hole. |
| Documented application focus | High-performance drilling in the materials available for the exact ADO item. | Large-diameter holes on machines with limited available horsepower. |
| Technical selection detail | Official item pages publish unique EDP numbers. | Allied states that the system can ignore core shifts up to 3.175 mm (0.125 in) in applicable opening operations. |
| Primary documented constraint | Branding and diameter do not establish list, L/D, shank, coating, coolant, pilot, or cutting-data equivalence. | Cartridge setup and diameter adjustment require controlled assembly and measurement procedures. |
| Manufacturer-guided selection | Capture list, EDP, description, diameter, L/D, lengths, shank, coating, coolant, material, and cutting-data source. | Use Revolution Drill when large-hole flexibility and low-horsepower capability justify an adjustable multi-insert system. |
Best fit by application
OSG A Brand ADO
- High-performance drilling in the materials available for the exact ADO item.
- Capture list, EDP, description, diameter, L/D, lengths, shank, coating, coolant, material, and cutting-data source.
Allied Machine Revolution Drill
- Large-diameter holes on machines with limited available horsepower.
- Use Revolution Drill when large-hole flexibility and low-horsepower capability justify an adjustable multi-insert system.
Selection notes
Use A Brand ADO when its documented application focus and technical configuration match the operation more closely; use Revolution Drill when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- A Brand ADO: Branding and diameter do not establish list, L/D, shank, coating, coolant, pilot, or cutting-data equivalence.
- Revolution Drill: Cartridge setup and diameter adjustment require controlled assembly and measurement procedures.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
- A Brand ADO: OSG A Brand ADO Lists 6500, 6510, and 6520 technical data
- A Brand ADO: OSG A Brand ADO-3D EDP 8691100 item record
- A Brand ADO: OSG A Brand ADO-5D EDP 8692460 item record
- A Brand ADO: OSG A Brand ADO-5D EDP 651034211 item record
- Revolution Drill: Allied Revolution Drill official product page
- Revolution Drill: Allied Revolution and Opening Drill cutting data
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.