Home / Knowledge / Kennametal KenTIP FS vs Guhring RT 100 FB
Kennametal KenTIP FS vs Guhring RT 100 FB
Kennametal KenTIP FS and Guhring RT 100 FB are documented holemaking systems with different product architecture and application priorities. KenTIP FS is Kennametal's replaceable-tip modular drilling system in which a carbide insert covers the full drill point and connects to a reusable body. Guhring RT 100 FB Series 6596 is a two-flute, coolant-through flat-bottom carbide drill.
Side-by-side comparison
| Category | Kennametal KenTIP FS | Guhring RT 100 FB |
|---|---|---|
| System architecture | System architecture: reusable drill body plus full-front carbide insert, with coupling protection and compatibility controlled by diameter and seat size. | Series 6596 is approximately 3xD with a 180-degree point. |
| Documented application focus | Modular drilling where replaceable solid-carbide cutting geometry is desired with a reusable body. | Flat-bottom holes and low-burr exits. |
| Technical selection detail | Official body records distinguish SS straight shanks and SCF flanged shanks with flat, depth ratios, diameter ranges, and coolant features. | It uses carbide, nano-FIREX coating, internal coolant, and an HA shank. |
| Primary documented constraint | Body diameter range, insert seat, geometry, and grade must match; family membership alone does not establish compatibility. | Series 6596 and micro Series 6496 are not interchangeable. |
| Manufacturer-guided selection | Capture body and insert material numbers, catalog IDs, body depth, shank style, seat, insert geometry, grade, diameter, and coolant condition as one assembly. | Store series, EDP, code, diameter, L/D, point, shank, coating, coolant, and catalog revision. |
Best fit by application
Kennametal KenTIP FS
- Modular drilling where replaceable solid-carbide cutting geometry is desired with a reusable body.
- Capture body and insert material numbers, catalog IDs, body depth, shank style, seat, insert geometry, grade, diameter, and coolant condition as one assembly.
Guhring RT 100 FB
- Flat-bottom holes and low-burr exits.
- Store series, EDP, code, diameter, L/D, point, shank, coating, coolant, and catalog revision.
Selection notes
Use KenTIP FS when its documented application focus and technical configuration match the operation more closely; use RT 100 FB when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- KenTIP FS: Body diameter range, insert seat, geometry, and grade must match; family membership alone does not establish compatibility.
- RT 100 FB: Series 6596 and micro Series 6496 are not interchangeable.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.