Home / Knowledge / Kennametal KenTIP FS vs Guhring RT 100 Al

Kennametal KenTIP FS vs Guhring RT 100 Al

Kennametal KenTIP FS and Guhring RT 100 Al are documented holemaking systems with different product architecture and application priorities. KenTIP FS is Kennametal's replaceable-tip modular drilling system in which a carbide insert covers the full drill point and connects to a reusable body. Guhring RT 100 Al is a solid-carbide drill platform for aluminum and other nonferrous applications.

Side-by-side comparison

Category	Kennametal KenTIP FS	Guhring RT 100 Al
System architecture	System architecture: reusable drill body plus full-front carbide insert, with coupling protection and compatibility controlled by diameter and seat size.	Official Series 6062, 5768, and 6063 are listed as 3xD, 5xD, and 7xD RT 100 Al carbide drills with coolant through, an HA shank, and a 140-degree point.
Documented application focus	Modular drilling where replaceable solid-carbide cutting geometry is desired with a reusable body.	Production drilling in aluminum where polished functional surfaces and internal coolant support chip evacuation and built-up-edge control.
Technical selection detail	Official body records distinguish SS straight shanks and SCF flanged shanks with flat, depth ratios, diameter ranges, and coolant features.	Guhring describes optimized cutting-edge geometry, a relieved cone, a slightly concave main cutting edge, sharp cutting characteristics, and polished functional surfaces.
Primary documented constraint	Body diameter range, insert seat, geometry, and grade must match; family membership alone does not establish compatibility.	RT 100 Al is not one interchangeable drill; 3xD, 5xD, 7xD, micro-precision, and deep-hole series have distinct geometry and operating requirements.
Manufacturer-guided selection	Capture body and insert material numbers, catalog IDs, body depth, shank style, seat, insert geometry, grade, diameter, and coolant condition as one assembly.	Store the Guhring series, code, EDP number, diameter, L/D, point angle, shank, coolant configuration, and current cutting-data source as separate searchable fields.

Best fit by application

Kennametal KenTIP FS

Modular drilling where replaceable solid-carbide cutting geometry is desired with a reusable body.
Capture body and insert material numbers, catalog IDs, body depth, shank style, seat, insert geometry, grade, diameter, and coolant condition as one assembly.

Guhring RT 100 Al

Production drilling in aluminum where polished functional surfaces and internal coolant support chip evacuation and built-up-edge control.
Store the Guhring series, code, EDP number, diameter, L/D, point angle, shank, coolant configuration, and current cutting-data source as separate searchable fields.

Selection notes

Use KenTIP FS when its documented application focus and technical configuration match the operation more closely; use RT 100 Al when its documented architecture and constraints provide the better fit.

Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.

Variables to validate

KenTIP FS: Body diameter range, insert seat, geometry, and grade must match; family membership alone does not establish compatibility.
RT 100 Al: RT 100 Al is not one interchangeable drill; 3xD, 5xD, 7xD, micro-precision, and deep-hole series have distinct geometry and operating requirements.
Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.

Official product references

We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.

Signup