Home / Knowledge / Kennametal KenTIP FS vs Allied Machine T-A Pro
Kennametal KenTIP FS vs Allied Machine T-A Pro
Kennametal KenTIP FS and Allied Machine T-A Pro are documented holemaking systems with different product architecture and application priorities. KenTIP FS is Kennametal's replaceable-tip modular drilling system in which a carbide insert covers the full drill point and connects to a reusable body. Allied Machine T-A Pro is a replaceable-insert drilling system for production holemaking.
Side-by-side comparison
| Category | Kennametal KenTIP FS | Allied Machine T-A Pro |
|---|---|---|
| System architecture | System architecture: reusable drill body plus full-front carbide insert, with coupling protection and compatibility controlled by diameter and seat size. | Allied positions T-A Pro as a high-penetration replaceable-insert drill family. |
| Documented application focus | Modular drilling where replaceable solid-carbide cutting geometry is desired with a reusable body. | Production drilling where a replaceable carbide insert and reusable holder support repeat diameter and material changes. |
| Technical selection detail | Official body records distinguish SS straight shanks and SCF flanged shanks with flat, depth ratios, diameter ranges, and coolant features. | The official geometry directory separates material-specific insert options; holder and insert compatibility must be confirmed by series and diameter. |
| Primary documented constraint | Body diameter range, insert seat, geometry, and grade must match; family membership alone does not establish compatibility. | Do not substitute T-A, GEN2 T-A, T-A Pro, or GEN3SYS inserts by diameter alone. |
| Manufacturer-guided selection | Capture body and insert material numbers, catalog IDs, body depth, shank style, seat, insert geometry, grade, diameter, and coolant condition as one assembly. | Record the complete holder and insert numbers, diameter, drilling depth, work material, machine interface, coolant pressure, entry condition, and required tolerance. |
Best fit by application
Kennametal KenTIP FS
- Modular drilling where replaceable solid-carbide cutting geometry is desired with a reusable body.
- Capture body and insert material numbers, catalog IDs, body depth, shank style, seat, insert geometry, grade, diameter, and coolant condition as one assembly.
Allied Machine T-A Pro
- Production drilling where a replaceable carbide insert and reusable holder support repeat diameter and material changes.
- Record the complete holder and insert numbers, diameter, drilling depth, work material, machine interface, coolant pressure, entry condition, and required tolerance.
Selection notes
Use KenTIP FS when its documented application focus and technical configuration match the operation more closely; use T-A Pro when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- KenTIP FS: Body diameter range, insert seat, geometry, and grade must match; family membership alone does not establish compatibility.
- T-A Pro: Do not substitute T-A, GEN2 T-A, T-A Pro, or GEN3SYS inserts by diameter alone.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
- KenTIP FS: Kennametal KenTIP FS 5xD body record 6389370
- KenTIP FS: Kennametal KenTIP FS SCF body record 6372514
- KenTIP FS: Kennametal KenTIP FS FEG insert record 6771157
- T-A Pro: Allied Machine replaceable insert drill directory
- T-A Pro: Allied Machine T-A Pro insert geometries
- T-A Pro: Allied Machine product literature
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.