Home / Knowledge / Kennametal KenTIP FS vs Allied Machine GEN2 T-A
Kennametal KenTIP FS vs Allied Machine GEN2 T-A
Kennametal KenTIP FS and Allied Machine GEN2 T-A are documented holemaking systems with different product architecture and application priorities. KenTIP FS is Kennametal's replaceable-tip modular drilling system in which a carbide insert covers the full drill point and connects to a reusable body. Allied Machine GEN2 T-A is a distinct T-A-system generation combining Notch Point geometry and AM200 coating options with compatible GEN2 holders and inserts.
Side-by-side comparison
| Category | Kennametal KenTIP FS | Allied Machine GEN2 T-A |
|---|---|---|
| System architecture | System architecture: reusable drill body plus full-front carbide insert, with coupling protection and compatibility controlled by diameter and seat size. | Allied describes GEN2 T-A using Notch Point geometry and AM200 coating within its replaceable-insert drill directory. |
| Documented application focus | Modular drilling where replaceable solid-carbide cutting geometry is desired with a reusable body. | Production drilling where an established GEN2 T-A assembly is being replaced, expanded, or requoted. |
| Technical selection detail | Official body records distinguish SS straight shanks and SCF flanged shanks with flat, depth ratios, diameter ranges, and coolant features. | GEN2 T-A and original T-A share literature coverage but remain distinct product generations. |
| Primary documented constraint | Body diameter range, insert seat, geometry, and grade must match; family membership alone does not establish compatibility. | Shared branding does not establish cross-generation holder and insert compatibility. |
| Manufacturer-guided selection | Capture body and insert material numbers, catalog IDs, body depth, shank style, seat, insert geometry, grade, diameter, and coolant condition as one assembly. | Preserve the installed GEN2 body and insert numbers, then compare any current alternative on diameter, L/D, geometry, coolant, holder interface, and required process change. |
Best fit by application
Kennametal KenTIP FS
- Modular drilling where replaceable solid-carbide cutting geometry is desired with a reusable body.
- Capture body and insert material numbers, catalog IDs, body depth, shank style, seat, insert geometry, grade, diameter, and coolant condition as one assembly.
Allied Machine GEN2 T-A
- Production drilling where an established GEN2 T-A assembly is being replaced, expanded, or requoted.
- Preserve the installed GEN2 body and insert numbers, then compare any current alternative on diameter, L/D, geometry, coolant, holder interface, and required process change.
Selection notes
Use KenTIP FS when its documented application focus and technical configuration match the operation more closely; use GEN2 T-A when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- KenTIP FS: Body diameter range, insert seat, geometry, and grade must match; family membership alone does not establish compatibility.
- GEN2 T-A: Shared branding does not establish cross-generation holder and insert compatibility.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.