Home / Knowledge / Kennametal GOdrill vs Guhring RT 100 Al
Kennametal GOdrill vs Guhring RT 100 Al
Kennametal GOdrill and Guhring RT 100 Al are documented holemaking systems with different product architecture and application priorities. GOdrill is Kennametal's general-purpose solid-carbide drill family for multi-material production. Guhring RT 100 Al is a solid-carbide drill platform for aluminum and other nonferrous applications.
Side-by-side comparison
| Category | Kennametal GOdrill | Guhring RT 100 Al |
|---|---|---|
| System architecture | Official B051_CPG records identify 3xD internal-coolant metric drills with straight cylindrical shanks. | Official Series 6062, 5768, and 6063 are listed as 3xD, 5xD, and 7xD RT 100 Al carbide drills with coolant through, an HA shank, and a 140-degree point. |
| Documented application focus | General-purpose drilling across ISO P, M, K, N, S, and H material groups where the selected item record supports the application. | Production drilling in aluminum where polished functional surfaces and internal coolant support chip evacuation and built-up-edge control. |
| Technical selection detail | B051F_CPG records use a Whistle Notch shank and are separate catalog configurations. | Guhring describes optimized cutting-edge geometry, a relieved cone, a slightly concave main cutting edge, sharp cutting characteristics, and polished functional surfaces. |
| Primary documented constraint | Several cited official item pages are marked no longer available; historical identifiers must not be represented as current stock. | RT 100 Al is not one interchangeable drill; 3xD, 5xD, 7xD, micro-precision, and deep-hole series have distinct geometry and operating requirements. |
| Manufacturer-guided selection | Capture material number, catalog ID, diameter, depth ratio, shank form, coolant path, grade, and current availability state. | Store the Guhring series, code, EDP number, diameter, L/D, point angle, shank, coolant configuration, and current cutting-data source as separate searchable fields. |
Best fit by application
Kennametal GOdrill
- General-purpose drilling across ISO P, M, K, N, S, and H material groups where the selected item record supports the application.
- Capture material number, catalog ID, diameter, depth ratio, shank form, coolant path, grade, and current availability state.
Guhring RT 100 Al
- Production drilling in aluminum where polished functional surfaces and internal coolant support chip evacuation and built-up-edge control.
- Store the Guhring series, code, EDP number, diameter, L/D, point angle, shank, coolant configuration, and current cutting-data source as separate searchable fields.
Selection notes
Use GOdrill when its documented application focus and technical configuration match the operation more closely; use RT 100 Al when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- GOdrill: Several cited official item pages are marked no longer available; historical identifiers must not be represented as current stock.
- RT 100 Al: RT 100 Al is not one interchangeable drill; 3xD, 5xD, 7xD, micro-precision, and deep-hole series have distinct geometry and operating requirements.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.