Home / Knowledge / Kennametal GOdrill vs Allied Machine GEN2 T-A
Kennametal GOdrill vs Allied Machine GEN2 T-A
Kennametal GOdrill and Allied Machine GEN2 T-A are documented holemaking systems with different product architecture and application priorities. GOdrill is Kennametal's general-purpose solid-carbide drill family for multi-material production. Allied Machine GEN2 T-A is a distinct T-A-system generation combining Notch Point geometry and AM200 coating options with compatible GEN2 holders and inserts.
Side-by-side comparison
| Category | Kennametal GOdrill | Allied Machine GEN2 T-A |
|---|---|---|
| System architecture | Official B051_CPG records identify 3xD internal-coolant metric drills with straight cylindrical shanks. | Allied describes GEN2 T-A using Notch Point geometry and AM200 coating within its replaceable-insert drill directory. |
| Documented application focus | General-purpose drilling across ISO P, M, K, N, S, and H material groups where the selected item record supports the application. | Production drilling where an established GEN2 T-A assembly is being replaced, expanded, or requoted. |
| Technical selection detail | B051F_CPG records use a Whistle Notch shank and are separate catalog configurations. | GEN2 T-A and original T-A share literature coverage but remain distinct product generations. |
| Primary documented constraint | Several cited official item pages are marked no longer available; historical identifiers must not be represented as current stock. | Shared branding does not establish cross-generation holder and insert compatibility. |
| Manufacturer-guided selection | Capture material number, catalog ID, diameter, depth ratio, shank form, coolant path, grade, and current availability state. | Preserve the installed GEN2 body and insert numbers, then compare any current alternative on diameter, L/D, geometry, coolant, holder interface, and required process change. |
Best fit by application
Kennametal GOdrill
- General-purpose drilling across ISO P, M, K, N, S, and H material groups where the selected item record supports the application.
- Capture material number, catalog ID, diameter, depth ratio, shank form, coolant path, grade, and current availability state.
Allied Machine GEN2 T-A
- Production drilling where an established GEN2 T-A assembly is being replaced, expanded, or requoted.
- Preserve the installed GEN2 body and insert numbers, then compare any current alternative on diameter, L/D, geometry, coolant, holder interface, and required process change.
Selection notes
Use GOdrill when its documented application focus and technical configuration match the operation more closely; use GEN2 T-A when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- GOdrill: Several cited official item pages are marked no longer available; historical identifiers must not be represented as current stock.
- GEN2 T-A: Shared branding does not establish cross-generation holder and insert compatibility.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.