Home / Knowledge / Guhring RT 100 U vs Allied Machine Revolution Drill
Guhring RT 100 U vs Allied Machine Revolution Drill
Guhring RT 100 U and Allied Machine Revolution Drill are documented holemaking systems with different product architecture and application priorities. Guhring RT 100 U is a coolant-through carbide drill platform with distinct depth and shank series. Revolution Drill is Allied Machine's adjustable large-diameter indexable drilling system for drilling from solid or opening an existing hole.
Side-by-side comparison
| Category | Guhring RT 100 U | Allied Machine Revolution Drill |
|---|---|---|
| System architecture | Series 5610 is a 3xD nano-FIREX, 140-degree RT 100 U with coolant and HE shank. | Can drill from solid without a pilot or open an existing hole. |
| Documented application focus | Production drilling in the material groups available for the exact RT 100 U item. | Large-diameter holes on machines with limited available horsepower. |
| Technical selection detail | Series 5511 is the 5xD nano-FIREX, 140-degree HA-shank branch. | Allied states that the system can ignore core shifts up to 3.175 mm (0.125 in) in applicable opening operations. |
| Primary documented constraint | Depth, shank, coating, margin design, diameter, and EDP identity control compatibility. | Cartridge setup and diameter adjustment require controlled assembly and measurement procedures. |
| Manufacturer-guided selection | Store series, code, EDP, diameter, L/D, shank, coating, point, margin form, coolant, and current cutting-data source. | Use Revolution Drill when large-hole flexibility and low-horsepower capability justify an adjustable multi-insert system. |
Best fit by application
Guhring RT 100 U
- Production drilling in the material groups available for the exact RT 100 U item.
- Store series, code, EDP, diameter, L/D, shank, coating, point, margin form, coolant, and current cutting-data source.
Allied Machine Revolution Drill
- Large-diameter holes on machines with limited available horsepower.
- Use Revolution Drill when large-hole flexibility and low-horsepower capability justify an adjustable multi-insert system.
Selection notes
Use RT 100 U when its documented application focus and technical configuration match the operation more closely; use Revolution Drill when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- RT 100 U: Depth, shank, coating, margin design, diameter, and EDP identity control compatibility.
- Revolution Drill: Cartridge setup and diameter adjustment require controlled assembly and measurement procedures.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
- RT 100 U: Guhring RT 100 U Series 5610, 3xD
- RT 100 U: Guhring RT 100 U Series 5511, 5xD
- RT 100 U: Guhring RT 100 U Series 5525, 12xD
- RT 100 U: Guhring RT 100 U EDP 9056100047600 item record
- Revolution Drill: Allied Revolution Drill official product page
- Revolution Drill: Allied Revolution and Opening Drill cutting data
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.