Home / Knowledge / Guhring RT 100 FB vs Allied Machine Revolution Drill
Guhring RT 100 FB vs Allied Machine Revolution Drill
Guhring RT 100 FB and Allied Machine Revolution Drill are documented holemaking systems with different product architecture and application priorities. Guhring RT 100 FB Series 6596 is a two-flute, coolant-through flat-bottom carbide drill. Revolution Drill is Allied Machine's adjustable large-diameter indexable drilling system for drilling from solid or opening an existing hole.
Side-by-side comparison
| Category | Guhring RT 100 FB | Allied Machine Revolution Drill |
|---|---|---|
| System architecture | Series 6596 is approximately 3xD with a 180-degree point. | Can drill from solid without a pilot or open an existing hole. |
| Documented application focus | Flat-bottom holes and low-burr exits. | Large-diameter holes on machines with limited available horsepower. |
| Technical selection detail | It uses carbide, nano-FIREX coating, internal coolant, and an HA shank. | Allied states that the system can ignore core shifts up to 3.175 mm (0.125 in) in applicable opening operations. |
| Primary documented constraint | Series 6596 and micro Series 6496 are not interchangeable. | Cartridge setup and diameter adjustment require controlled assembly and measurement procedures. |
| Manufacturer-guided selection | Store series, EDP, code, diameter, L/D, point, shank, coating, coolant, and catalog revision. | Use Revolution Drill when large-hole flexibility and low-horsepower capability justify an adjustable multi-insert system. |
Best fit by application
Guhring RT 100 FB
- Flat-bottom holes and low-burr exits.
- Store series, EDP, code, diameter, L/D, point, shank, coating, coolant, and catalog revision.
Allied Machine Revolution Drill
- Large-diameter holes on machines with limited available horsepower.
- Use Revolution Drill when large-hole flexibility and low-horsepower capability justify an adjustable multi-insert system.
Selection notes
Use RT 100 FB when its documented application focus and technical configuration match the operation more closely; use Revolution Drill when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- RT 100 FB: Series 6596 and micro Series 6496 are not interchangeable.
- Revolution Drill: Cartridge setup and diameter adjustment require controlled assembly and measurement procedures.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.