Home / Knowledge / Guhring RT 100 FB vs Allied Machine GEN3SYS XT
Guhring RT 100 FB vs Allied Machine GEN3SYS XT
Guhring RT 100 FB and Allied Machine GEN3SYS XT are documented holemaking systems with different product architecture and application priorities. Guhring RT 100 FB Series 6596 is a two-flute, coolant-through flat-bottom carbide drill. GEN3SYS XT is Allied Machine's high-penetration replaceable-insert drilling system.
Side-by-side comparison
| Category | Guhring RT 100 FB | Allied Machine GEN3SYS XT |
|---|---|---|
| System architecture | Series 6596 is approximately 3xD with a 180-degree point. | Architecture: carbide replaceable insert connected to a reusable coolant-through GEN3SYS holder. |
| Documented application focus | Flat-bottom holes and low-burr exits. | High-penetration production drilling where carbide insert productivity is prioritized. |
| Technical selection detail | It uses carbide, nano-FIREX coating, internal coolant, and an HA shank. | Insert families include XT Standard, AS stainless, CI cast iron, and LR low-rake geometries. |
| Primary documented constraint | Series 6596 and micro Series 6496 are not interchangeable. | GEN3SYS XT and XT Pro are related but distinct insert offerings; do not assume identical geometry, coating, or performance. |
| Manufacturer-guided selection | Store series, EDP, code, diameter, L/D, point, shank, coating, coolant, and catalog revision. | Use GEN3SYS XT when carbide high-penetration drilling and strong chip control are more important than the broader general-purpose flexibility of T-A. |
Best fit by application
Guhring RT 100 FB
- Flat-bottom holes and low-burr exits.
- Store series, EDP, code, diameter, L/D, point, shank, coating, coolant, and catalog revision.
Allied Machine GEN3SYS XT
- High-penetration production drilling where carbide insert productivity is prioritized.
- Use GEN3SYS XT when carbide high-penetration drilling and strong chip control are more important than the broader general-purpose flexibility of T-A.
Selection notes
Use RT 100 FB when its documented application focus and technical configuration match the operation more closely; use GEN3SYS XT when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- RT 100 FB: Series 6596 and micro Series 6496 are not interchangeable.
- GEN3SYS XT: GEN3SYS XT and XT Pro are related but distinct insert offerings; do not assume identical geometry, coating, or performance.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.