Home / Knowledge / Guhring RT 100 Al vs OSG A Brand ADO
Guhring RT 100 Al vs OSG A Brand ADO
Guhring RT 100 Al and OSG A Brand ADO are documented holemaking systems with different product architecture and application priorities. Guhring RT 100 Al is a solid-carbide drill platform for aluminum and other nonferrous applications. OSG A Brand ADO is a coolant-fed carbide drill platform with distinct depth lists.
Side-by-side comparison
| Category | Guhring RT 100 Al | OSG A Brand ADO |
|---|---|---|
| System architecture | Official Series 6062, 5768, and 6063 are listed as 3xD, 5xD, and 7xD RT 100 Al carbide drills with coolant through, an HA shank, and a 140-degree point. | List 6500 is ADO 3D, List 6510 is 5D, and List 6520 is 8D. |
| Documented application focus | Production drilling in aluminum where polished functional surfaces and internal coolant support chip evacuation and built-up-edge control. | High-performance drilling in the materials available for the exact ADO item. |
| Technical selection detail | Guhring describes optimized cutting-edge geometry, a relieved cone, a slightly concave main cutting edge, sharp cutting characteristics, and polished functional surfaces. | Official item pages publish unique EDP numbers. |
| Primary documented constraint | RT 100 Al is not one interchangeable drill; 3xD, 5xD, 7xD, micro-precision, and deep-hole series have distinct geometry and operating requirements. | Branding and diameter do not establish list, L/D, shank, coating, coolant, pilot, or cutting-data equivalence. |
| Manufacturer-guided selection | Store the Guhring series, code, EDP number, diameter, L/D, point angle, shank, coolant configuration, and current cutting-data source as separate searchable fields. | Capture list, EDP, description, diameter, L/D, lengths, shank, coating, coolant, material, and cutting-data source. |
Best fit by application
Guhring RT 100 Al
- Production drilling in aluminum where polished functional surfaces and internal coolant support chip evacuation and built-up-edge control.
- Store the Guhring series, code, EDP number, diameter, L/D, point angle, shank, coolant configuration, and current cutting-data source as separate searchable fields.
OSG A Brand ADO
- High-performance drilling in the materials available for the exact ADO item.
- Capture list, EDP, description, diameter, L/D, lengths, shank, coating, coolant, material, and cutting-data source.
Selection notes
Use RT 100 Al when its documented application focus and technical configuration match the operation more closely; use A Brand ADO when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- RT 100 Al: RT 100 Al is not one interchangeable drill; 3xD, 5xD, 7xD, micro-precision, and deep-hole series have distinct geometry and operating requirements.
- A Brand ADO: Branding and diameter do not establish list, L/D, shank, coating, coolant, pilot, or cutting-data equivalence.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
- RT 100 Al: Guhring RT 100 Al Series 6062, 3xD
- RT 100 Al: Guhring RT 100 Al Series 5768, 5xD
- RT 100 Al: Guhring RT 100 Al Series 6063, 7xD
- A Brand ADO: OSG A Brand ADO Lists 6500, 6510, and 6520 technical data
- A Brand ADO: OSG A Brand ADO-3D EDP 8691100 item record
- A Brand ADO: OSG A Brand ADO-5D EDP 8692460 item record
- A Brand ADO: OSG A Brand ADO-5D EDP 651034211 item record
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.