Home / Knowledge / Guhring RT 100 Al vs Allied Machine Revolution Drill
Guhring RT 100 Al vs Allied Machine Revolution Drill
Guhring RT 100 Al and Allied Machine Revolution Drill are documented holemaking systems with different product architecture and application priorities. Guhring RT 100 Al is a solid-carbide drill platform for aluminum and other nonferrous applications. Revolution Drill is Allied Machine's adjustable large-diameter indexable drilling system for drilling from solid or opening an existing hole.
Side-by-side comparison
| Category | Guhring RT 100 Al | Allied Machine Revolution Drill |
|---|---|---|
| System architecture | Official Series 6062, 5768, and 6063 are listed as 3xD, 5xD, and 7xD RT 100 Al carbide drills with coolant through, an HA shank, and a 140-degree point. | Can drill from solid without a pilot or open an existing hole. |
| Documented application focus | Production drilling in aluminum where polished functional surfaces and internal coolant support chip evacuation and built-up-edge control. | Large-diameter holes on machines with limited available horsepower. |
| Technical selection detail | Guhring describes optimized cutting-edge geometry, a relieved cone, a slightly concave main cutting edge, sharp cutting characteristics, and polished functional surfaces. | Allied states that the system can ignore core shifts up to 3.175 mm (0.125 in) in applicable opening operations. |
| Primary documented constraint | RT 100 Al is not one interchangeable drill; 3xD, 5xD, 7xD, micro-precision, and deep-hole series have distinct geometry and operating requirements. | Cartridge setup and diameter adjustment require controlled assembly and measurement procedures. |
| Manufacturer-guided selection | Store the Guhring series, code, EDP number, diameter, L/D, point angle, shank, coolant configuration, and current cutting-data source as separate searchable fields. | Use Revolution Drill when large-hole flexibility and low-horsepower capability justify an adjustable multi-insert system. |
Best fit by application
Guhring RT 100 Al
- Production drilling in aluminum where polished functional surfaces and internal coolant support chip evacuation and built-up-edge control.
- Store the Guhring series, code, EDP number, diameter, L/D, point angle, shank, coolant configuration, and current cutting-data source as separate searchable fields.
Allied Machine Revolution Drill
- Large-diameter holes on machines with limited available horsepower.
- Use Revolution Drill when large-hole flexibility and low-horsepower capability justify an adjustable multi-insert system.
Selection notes
Use RT 100 Al when its documented application focus and technical configuration match the operation more closely; use Revolution Drill when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- RT 100 Al: RT 100 Al is not one interchangeable drill; 3xD, 5xD, 7xD, micro-precision, and deep-hole series have distinct geometry and operating requirements.
- Revolution Drill: Cartridge setup and diameter adjustment require controlled assembly and measurement procedures.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.