Home / Knowledge / Guhring RF 100 Diver vs Seco Tools Jabro Solid Carbide End Mills
Guhring RF 100 Diver vs Seco Tools Jabro Solid Carbide End Mills
Guhring RF 100 Diver and Seco Tools Jabro Solid Carbide End Mills are documented milling systems with different product architecture and application priorities. Guhring RF 100 Diver is a multi-application solid-carbide end-mill family built for ramping, drilling, slotting, roughing, and finishing. Seco Jabro is a broad solid-carbide end-mill portfolio covering high-performance, high-speed, material-specific, and feature-specific milling.
Side-by-side comparison
| Category | Guhring RF 100 Diver | Seco Tools Jabro Solid Carbide End Mills |
|---|---|---|
| System architecture | Official Series 6798 is a three-flute carbide RF 100 Diver with center cutting, a special drill face, Signum coating, and 41/43/45-degree unequal helix. | Seco describes differential pitch and edge preparation as portfolio features used to reduce vibration and support tool life, while geometries, diameters, and coatings vary by item. |
| Documented application focus | Ramping, helical entry, plunging, slotting, roughing, and finishing with one family. | High-performance roughing and finishing of titanium, heat-resistant alloys, hardened steel, aluminum, graphite, and other materials with the exact specified geometry. |
| Technical selection detail | Series 6736 is a four-flute metric carbide family with center cutting, neck clearance, Signum nano-Si coating, right-hand cutting, HB Weldon-flat shank, and 36/37/38-degree unequal helix. | HPM examples include JHP770 for titanium and JHP780 for heat-resistant alloys; these are distinct application geometries rather than interchangeable Jabro labels. |
| Primary documented constraint | RF 100 Diver is not one interchangeable item; verify series, EDP number, diameter, flute count, corner geometry, reach, coating, and shank. | Jabro is a portfolio name and does not establish geometry, material coverage, coating, dimensions, or interchangeability. |
| Manufacturer-guided selection | Store Guhring series, EDP number, and code number separately, then attach the current catalog page and cutting-data document to the operational product record. | Capture the complete Seco product identifier, Jabro branch, geometry, diameter, flute count, reach, corner form, coating, material group, feature, and current cutting-data source. |
Best fit by application
Guhring RF 100 Diver
- Ramping, helical entry, plunging, slotting, roughing, and finishing with one family.
- Store Guhring series, EDP number, and code number separately, then attach the current catalog page and cutting-data document to the operational product record.
Seco Tools Jabro Solid Carbide End Mills
- High-performance roughing and finishing of titanium, heat-resistant alloys, hardened steel, aluminum, graphite, and other materials with the exact specified geometry.
- Capture the complete Seco product identifier, Jabro branch, geometry, diameter, flute count, reach, corner form, coating, material group, feature, and current cutting-data source.
Selection notes
Use RF 100 Diver when its documented application focus and technical configuration match the operation more closely; use Jabro Solid Carbide End Mills when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- RF 100 Diver: RF 100 Diver is not one interchangeable item; verify series, EDP number, diameter, flute count, corner geometry, reach, coating, and shank.
- Jabro Solid Carbide End Mills: Jabro is a portfolio name and does not establish geometry, material coverage, coating, dimensions, or interchangeability.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
- RF 100 Diver: Guhring RF 100 Diver Series 6798
- RF 100 Diver: Guhring RF 100 Diver Series 6736
- Jabro Solid Carbide End Mills: Seco official Jabro solid-carbide end-mill overview
- Jabro Solid Carbide End Mills: Seco official Jabro solid-carbide tools overview
- Jabro Solid Carbide End Mills: Seco official high-speed solid-carbide end-mill directory
- Jabro Solid Carbide End Mills: Seco official Jabro fir-tree and dovetail tools
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.