Home / Knowledge / BIG DAISHOWA New Hi-Power Milling Chuck vs Guhring RF 100 Diver
BIG DAISHOWA New Hi-Power Milling Chuck vs Guhring RF 100 Diver
BIG DAISHOWA New Hi-Power Milling Chuck and Guhring RF 100 Diver are documented milling systems with different product architecture and application priorities. New Hi-Power Milling Chuck is BIG DAISHOWA's heavy-duty milling-chuck family. Guhring RF 100 Diver is a multi-application solid-carbide end-mill family built for ramping, drilling, slotting, roughing, and finishing.
Side-by-side comparison
| Category | BIG DAISHOWA New Hi-Power Milling Chuck | Guhring RF 100 Diver |
|---|---|---|
| System architecture | The official family page distinguishes standard, slim S, and small-diameter J types; these configurations have different envelopes and coolant behavior. | Official Series 6798 is a three-flute carbide RF 100 Diver with center cutting, a special drill face, Signum coating, and 41/43/45-degree unequal helix. |
| Documented application focus | Heavy-duty end milling where tool pullout resistance, radial support, and chatter control matter. | Ramping, helical entry, plunging, slotting, roughing, and finishing with one family. |
| Technical selection detail | The J type is positioned for 1/2 in or 12 mm cutters with peripheral jet coolant, while the broader family includes larger inch and metric clamping diameters. | Series 6736 is a four-flute metric carbide family with center cutting, neck clearance, Signum nano-Si coating, right-hand cutting, HB Weldon-flat shank, and 36/37/38-degree unequal helix. |
| Primary documented constraint | Standard, S, and J holders are not interchangeable descriptions; interface, bore, projection, outside envelope, nut, collet, and coolant path must be explicit. | RF 100 Diver is not one interchangeable item; verify series, EDP number, diameter, flute count, corner geometry, reach, coating, and shank. |
| Manufacturer-guided selection | Record the full holder catalog number, spindle interface, cutter shank, projection, holder type, reduction collet, coolant method, and maximum operating speed. | Store Guhring series, EDP number, and code number separately, then attach the current catalog page and cutting-data document to the operational product record. |
Best fit by application
BIG DAISHOWA New Hi-Power Milling Chuck
- Heavy-duty end milling where tool pullout resistance, radial support, and chatter control matter.
- Record the full holder catalog number, spindle interface, cutter shank, projection, holder type, reduction collet, coolant method, and maximum operating speed.
Guhring RF 100 Diver
- Ramping, helical entry, plunging, slotting, roughing, and finishing with one family.
- Store Guhring series, EDP number, and code number separately, then attach the current catalog page and cutting-data document to the operational product record.
Selection notes
Use New Hi-Power Milling Chuck when its documented application focus and technical configuration match the operation more closely; use RF 100 Diver when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- New Hi-Power Milling Chuck: Standard, S, and J holders are not interchangeable descriptions; interface, bore, projection, outside envelope, nut, collet, and coolant path must be explicit.
- RF 100 Diver: RF 100 Diver is not one interchangeable item; verify series, EDP number, diameter, flute count, corner geometry, reach, coating, and shank.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.