Home / Knowledge / Allied Machine T-A vs Guhring RT 100 FB
Allied Machine T-A vs Guhring RT 100 FB
Allied Machine T-A and Guhring RT 100 FB are documented holemaking systems with different product architecture and application priorities. Allied Machine T-A is a replaceable-insert drilling platform with a broad range of holders, diameters, lengths, geometries, and material-specific options. Guhring RT 100 FB Series 6596 is a two-flute, coolant-through flat-bottom carbide drill.
Side-by-side comparison
| Category | Allied Machine T-A | Guhring RT 100 FB |
|---|---|---|
| System architecture | Allied lists T-A, GEN2 T-A, T-A Pro, and GEN3SYS XT/XT Pro as distinct replaceable-insert drill branches. | Series 6596 is approximately 3xD with a 180-degree point. |
| Documented application focus | General-production holemaking using reusable holders and replaceable drill inserts. | Flat-bottom holes and low-burr exits. |
| Technical selection detail | The original T-A branch has numerous geometry options and holder configurations. | It uses carbide, nano-FIREX coating, internal coolant, and an HA shank. |
| Primary documented constraint | Do not infer compatibility among T-A generations from diameter alone. | Series 6596 and micro Series 6496 are not interchangeable. |
| Manufacturer-guided selection | Record the full holder and insert identifiers, generation, diameter, drilling depth, material, coolant, machine interface, and entry condition. | Store series, EDP, code, diameter, L/D, point, shank, coating, coolant, and catalog revision. |
Best fit by application
Allied Machine T-A
- General-production holemaking using reusable holders and replaceable drill inserts.
- Record the full holder and insert identifiers, generation, diameter, drilling depth, material, coolant, machine interface, and entry condition.
Guhring RT 100 FB
- Flat-bottom holes and low-burr exits.
- Store series, EDP, code, diameter, L/D, point, shank, coating, coolant, and catalog revision.
Selection notes
Use T-A when its documented application focus and technical configuration match the operation more closely; use RT 100 FB when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- T-A: Do not infer compatibility among T-A generations from diameter alone.
- RT 100 FB: Series 6596 and micro Series 6496 are not interchangeable.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.