Home / Knowledge / Allied Machine T-A Pro vs Guhring RT 100 U
Allied Machine T-A Pro vs Guhring RT 100 U
Allied Machine T-A Pro and Guhring RT 100 U are documented holemaking systems with different product architecture and application priorities. Allied Machine T-A Pro is a replaceable-insert drilling system for production holemaking. Guhring RT 100 U is a coolant-through carbide drill platform with distinct depth and shank series.
Side-by-side comparison
| Category | Allied Machine T-A Pro | Guhring RT 100 U |
|---|---|---|
| System architecture | Allied positions T-A Pro as a high-penetration replaceable-insert drill family. | Series 5610 is a 3xD nano-FIREX, 140-degree RT 100 U with coolant and HE shank. |
| Documented application focus | Production drilling where a replaceable carbide insert and reusable holder support repeat diameter and material changes. | Production drilling in the material groups available for the exact RT 100 U item. |
| Technical selection detail | The official geometry directory separates material-specific insert options; holder and insert compatibility must be confirmed by series and diameter. | Series 5511 is the 5xD nano-FIREX, 140-degree HA-shank branch. |
| Primary documented constraint | Do not substitute T-A, GEN2 T-A, T-A Pro, or GEN3SYS inserts by diameter alone. | Depth, shank, coating, margin design, diameter, and EDP identity control compatibility. |
| Manufacturer-guided selection | Record the complete holder and insert numbers, diameter, drilling depth, work material, machine interface, coolant pressure, entry condition, and required tolerance. | Store series, code, EDP, diameter, L/D, shank, coating, point, margin form, coolant, and current cutting-data source. |
Best fit by application
Allied Machine T-A Pro
- Production drilling where a replaceable carbide insert and reusable holder support repeat diameter and material changes.
- Record the complete holder and insert numbers, diameter, drilling depth, work material, machine interface, coolant pressure, entry condition, and required tolerance.
Guhring RT 100 U
- Production drilling in the material groups available for the exact RT 100 U item.
- Store series, code, EDP, diameter, L/D, shank, coating, point, margin form, coolant, and current cutting-data source.
Selection notes
Use T-A Pro when its documented application focus and technical configuration match the operation more closely; use RT 100 U when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- T-A Pro: Do not substitute T-A, GEN2 T-A, T-A Pro, or GEN3SYS inserts by diameter alone.
- RT 100 U: Depth, shank, coating, margin design, diameter, and EDP identity control compatibility.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
- T-A Pro: Allied Machine replaceable insert drill directory
- T-A Pro: Allied Machine T-A Pro insert geometries
- T-A Pro: Allied Machine product literature
- RT 100 U: Guhring RT 100 U Series 5610, 3xD
- RT 100 U: Guhring RT 100 U Series 5511, 5xD
- RT 100 U: Guhring RT 100 U Series 5525, 12xD
- RT 100 U: Guhring RT 100 U EDP 9056100047600 item record
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.