Home / Knowledge / Allied Machine T-A Pro vs Guhring RT 100 FB
Allied Machine T-A Pro vs Guhring RT 100 FB
Allied Machine T-A Pro and Guhring RT 100 FB are documented holemaking systems with different product architecture and application priorities. Allied Machine T-A Pro is a replaceable-insert drilling system for production holemaking. Guhring RT 100 FB Series 6596 is a two-flute, coolant-through flat-bottom carbide drill.
Side-by-side comparison
| Category | Allied Machine T-A Pro | Guhring RT 100 FB |
|---|---|---|
| System architecture | Allied positions T-A Pro as a high-penetration replaceable-insert drill family. | Series 6596 is approximately 3xD with a 180-degree point. |
| Documented application focus | Production drilling where a replaceable carbide insert and reusable holder support repeat diameter and material changes. | Flat-bottom holes and low-burr exits. |
| Technical selection detail | The official geometry directory separates material-specific insert options; holder and insert compatibility must be confirmed by series and diameter. | It uses carbide, nano-FIREX coating, internal coolant, and an HA shank. |
| Primary documented constraint | Do not substitute T-A, GEN2 T-A, T-A Pro, or GEN3SYS inserts by diameter alone. | Series 6596 and micro Series 6496 are not interchangeable. |
| Manufacturer-guided selection | Record the complete holder and insert numbers, diameter, drilling depth, work material, machine interface, coolant pressure, entry condition, and required tolerance. | Store series, EDP, code, diameter, L/D, point, shank, coating, coolant, and catalog revision. |
Best fit by application
Allied Machine T-A Pro
- Production drilling where a replaceable carbide insert and reusable holder support repeat diameter and material changes.
- Record the complete holder and insert numbers, diameter, drilling depth, work material, machine interface, coolant pressure, entry condition, and required tolerance.
Guhring RT 100 FB
- Flat-bottom holes and low-burr exits.
- Store series, EDP, code, diameter, L/D, point, shank, coating, coolant, and catalog revision.
Selection notes
Use T-A Pro when its documented application focus and technical configuration match the operation more closely; use RT 100 FB when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- T-A Pro: Do not substitute T-A, GEN2 T-A, T-A Pro, or GEN3SYS inserts by diameter alone.
- RT 100 FB: Series 6596 and micro Series 6496 are not interchangeable.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.