Home / Knowledge / Allied Machine GEN3SYS XT Pro vs Guhring RT 100 U
Allied Machine GEN3SYS XT Pro vs Guhring RT 100 U
Allied Machine GEN3SYS XT Pro and Guhring RT 100 U are documented holemaking systems with different product architecture and application priorities. Allied Machine GEN3SYS XT Pro is a replaceable-insert drilling family with material-specific coating and geometry combinations. Guhring RT 100 U is a coolant-through carbide drill platform with distinct depth and shank series.
Side-by-side comparison
| Category | Allied Machine GEN3SYS XT Pro | Guhring RT 100 U |
|---|---|---|
| System architecture | Allied separates P, K, N, M, and structural-steel geometry branches in the official directory. | Series 5610 is a 3xD nano-FIREX, 140-degree RT 100 U with coolant and HE shank. |
| Documented application focus | High-penetration production drilling with material-specific insert geometry and coating selection. | Production drilling in the material groups available for the exact RT 100 U item. |
| Technical selection detail | The deep-hole procedure calls for a compatible pilot hole and controlled low-speed entry before full-speed drilling. | Series 5511 is the 5xD nano-FIREX, 140-degree HA-shank branch. |
| Primary documented constraint | A matching diameter does not establish holder, pocket, geometry, or coating compatibility. | Depth, shank, coating, margin design, diameter, and EDP identity control compatibility. |
| Manufacturer-guided selection | Attach the official assembly selection and record pilot tool, pilot depth, coolant pressure, work material, L/D, and entry/retraction procedure. | Store series, code, EDP, diameter, L/D, shank, coating, point, margin form, coolant, and current cutting-data source. |
Best fit by application
Allied Machine GEN3SYS XT Pro
- High-penetration production drilling with material-specific insert geometry and coating selection.
- Attach the official assembly selection and record pilot tool, pilot depth, coolant pressure, work material, L/D, and entry/retraction procedure.
Guhring RT 100 U
- Production drilling in the material groups available for the exact RT 100 U item.
- Store series, code, EDP, diameter, L/D, shank, coating, point, margin form, coolant, and current cutting-data source.
Selection notes
Use GEN3SYS XT Pro when its documented application focus and technical configuration match the operation more closely; use RT 100 U when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- GEN3SYS XT Pro: A matching diameter does not establish holder, pocket, geometry, or coating compatibility.
- RT 100 U: Depth, shank, coating, margin design, diameter, and EDP identity control compatibility.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
- GEN3SYS XT Pro: Allied Machine GEN3SYS XT Pro directory
- GEN3SYS XT Pro: Allied Machine replaceable insert drills
- GEN3SYS XT Pro: Allied Machine product literature
- RT 100 U: Guhring RT 100 U Series 5610, 3xD
- RT 100 U: Guhring RT 100 U Series 5511, 5xD
- RT 100 U: Guhring RT 100 U Series 5525, 12xD
- RT 100 U: Guhring RT 100 U EDP 9056100047600 item record
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.