Home / Knowledge / Allied Machine GEN3SYS XT Pro vs Guhring RT 100 FB
Allied Machine GEN3SYS XT Pro vs Guhring RT 100 FB
Allied Machine GEN3SYS XT Pro and Guhring RT 100 FB are documented holemaking systems with different product architecture and application priorities. Allied Machine GEN3SYS XT Pro is a replaceable-insert drilling family with material-specific coating and geometry combinations. Guhring RT 100 FB Series 6596 is a two-flute, coolant-through flat-bottom carbide drill.
Side-by-side comparison
| Category | Allied Machine GEN3SYS XT Pro | Guhring RT 100 FB |
|---|---|---|
| System architecture | Allied separates P, K, N, M, and structural-steel geometry branches in the official directory. | Series 6596 is approximately 3xD with a 180-degree point. |
| Documented application focus | High-penetration production drilling with material-specific insert geometry and coating selection. | Flat-bottom holes and low-burr exits. |
| Technical selection detail | The deep-hole procedure calls for a compatible pilot hole and controlled low-speed entry before full-speed drilling. | It uses carbide, nano-FIREX coating, internal coolant, and an HA shank. |
| Primary documented constraint | A matching diameter does not establish holder, pocket, geometry, or coating compatibility. | Series 6596 and micro Series 6496 are not interchangeable. |
| Manufacturer-guided selection | Attach the official assembly selection and record pilot tool, pilot depth, coolant pressure, work material, L/D, and entry/retraction procedure. | Store series, EDP, code, diameter, L/D, point, shank, coating, coolant, and catalog revision. |
Best fit by application
Allied Machine GEN3SYS XT Pro
- High-penetration production drilling with material-specific insert geometry and coating selection.
- Attach the official assembly selection and record pilot tool, pilot depth, coolant pressure, work material, L/D, and entry/retraction procedure.
Guhring RT 100 FB
- Flat-bottom holes and low-burr exits.
- Store series, EDP, code, diameter, L/D, point, shank, coating, coolant, and catalog revision.
Selection notes
Use GEN3SYS XT Pro when its documented application focus and technical configuration match the operation more closely; use RT 100 FB when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- GEN3SYS XT Pro: A matching diameter does not establish holder, pocket, geometry, or coating compatibility.
- RT 100 FB: Series 6596 and micro Series 6496 are not interchangeable.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.