Home / Knowledge / Allied Machine GEN2 T-A vs Guhring RT 100 U
Allied Machine GEN2 T-A vs Guhring RT 100 U
Allied Machine GEN2 T-A and Guhring RT 100 U are documented holemaking systems with different product architecture and application priorities. Allied Machine GEN2 T-A is a distinct T-A-system generation combining Notch Point geometry and AM200 coating options with compatible GEN2 holders and inserts. Guhring RT 100 U is a coolant-through carbide drill platform with distinct depth and shank series.
Side-by-side comparison
| Category | Allied Machine GEN2 T-A | Guhring RT 100 U |
|---|---|---|
| System architecture | Allied describes GEN2 T-A using Notch Point geometry and AM200 coating within its replaceable-insert drill directory. | Series 5610 is a 3xD nano-FIREX, 140-degree RT 100 U with coolant and HE shank. |
| Documented application focus | Production drilling where an established GEN2 T-A assembly is being replaced, expanded, or requoted. | Production drilling in the material groups available for the exact RT 100 U item. |
| Technical selection detail | GEN2 T-A and original T-A share literature coverage but remain distinct product generations. | Series 5511 is the 5xD nano-FIREX, 140-degree HA-shank branch. |
| Primary documented constraint | Shared branding does not establish cross-generation holder and insert compatibility. | Depth, shank, coating, margin design, diameter, and EDP identity control compatibility. |
| Manufacturer-guided selection | Preserve the installed GEN2 body and insert numbers, then compare any current alternative on diameter, L/D, geometry, coolant, holder interface, and required process change. | Store series, code, EDP, diameter, L/D, shank, coating, point, margin form, coolant, and current cutting-data source. |
Best fit by application
Allied Machine GEN2 T-A
- Production drilling where an established GEN2 T-A assembly is being replaced, expanded, or requoted.
- Preserve the installed GEN2 body and insert numbers, then compare any current alternative on diameter, L/D, geometry, coolant, holder interface, and required process change.
Guhring RT 100 U
- Production drilling in the material groups available for the exact RT 100 U item.
- Store series, code, EDP, diameter, L/D, shank, coating, point, margin form, coolant, and current cutting-data source.
Selection notes
Use GEN2 T-A when its documented application focus and technical configuration match the operation more closely; use RT 100 U when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- GEN2 T-A: Shared branding does not establish cross-generation holder and insert compatibility.
- RT 100 U: Depth, shank, coating, margin design, diameter, and EDP identity control compatibility.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.