Home / Knowledge / Allied Machine GEN2 T-A vs Guhring RT 100 Al
Allied Machine GEN2 T-A vs Guhring RT 100 Al
Allied Machine GEN2 T-A and Guhring RT 100 Al are documented holemaking systems with different product architecture and application priorities. Allied Machine GEN2 T-A is a distinct T-A-system generation combining Notch Point geometry and AM200 coating options with compatible GEN2 holders and inserts. Guhring RT 100 Al is a solid-carbide drill platform for aluminum and other nonferrous applications.
Side-by-side comparison
| Category | Allied Machine GEN2 T-A | Guhring RT 100 Al |
|---|---|---|
| System architecture | Allied describes GEN2 T-A using Notch Point geometry and AM200 coating within its replaceable-insert drill directory. | Official Series 6062, 5768, and 6063 are listed as 3xD, 5xD, and 7xD RT 100 Al carbide drills with coolant through, an HA shank, and a 140-degree point. |
| Documented application focus | Production drilling where an established GEN2 T-A assembly is being replaced, expanded, or requoted. | Production drilling in aluminum where polished functional surfaces and internal coolant support chip evacuation and built-up-edge control. |
| Technical selection detail | GEN2 T-A and original T-A share literature coverage but remain distinct product generations. | Guhring describes optimized cutting-edge geometry, a relieved cone, a slightly concave main cutting edge, sharp cutting characteristics, and polished functional surfaces. |
| Primary documented constraint | Shared branding does not establish cross-generation holder and insert compatibility. | RT 100 Al is not one interchangeable drill; 3xD, 5xD, 7xD, micro-precision, and deep-hole series have distinct geometry and operating requirements. |
| Manufacturer-guided selection | Preserve the installed GEN2 body and insert numbers, then compare any current alternative on diameter, L/D, geometry, coolant, holder interface, and required process change. | Store the Guhring series, code, EDP number, diameter, L/D, point angle, shank, coolant configuration, and current cutting-data source as separate searchable fields. |
Best fit by application
Allied Machine GEN2 T-A
- Production drilling where an established GEN2 T-A assembly is being replaced, expanded, or requoted.
- Preserve the installed GEN2 body and insert numbers, then compare any current alternative on diameter, L/D, geometry, coolant, holder interface, and required process change.
Guhring RT 100 Al
- Production drilling in aluminum where polished functional surfaces and internal coolant support chip evacuation and built-up-edge control.
- Store the Guhring series, code, EDP number, diameter, L/D, point angle, shank, coolant configuration, and current cutting-data source as separate searchable fields.
Selection notes
Use GEN2 T-A when its documented application focus and technical configuration match the operation more closely; use RT 100 Al when its documented architecture and constraints provide the better fit.
Compare complete configured assemblies and current manufacturer data rather than treating either family name as one universal item.
Variables to validate
- GEN2 T-A: Shared branding does not establish cross-generation holder and insert compatibility.
- RT 100 Al: RT 100 Al is not one interchangeable drill; 3xD, 5xD, 7xD, micro-precision, and deep-hole series have distinct geometry and operating requirements.
- Normalize diameter or cutter size, reach, interface, work material, machine conditions, coolant, and acceptance criteria before comparing performance or cost.
Official product references
We work to keep this information reliable, but specifications and availability can change. Verify critical details with the manufacturer through the official resources above.